top of page
Motor and Driver Options
Logo3_PCMbots_shadowversion_png.png

Products

 

Members will get access to our download pages.

Motor for TENKI OPTION 1.png
Motor for TENKI OPTION 1
​


12V DC High Torque Electric Motor, Metal Gear, Reverse Direction, and speed should be around 100RPM.

If you want to make TENKI for SNOWBLOWER, this is for drive motors, you need two of them, they working on 12V and drain around 5 to 6A of current under load.

You can find them on Alliexpress, this is the link, or you can click on the link below this text.

https://www.aliexpress.com/item/1005001975170012.html?spm=a2g0o.order_list.0.0.54061802x1g29r

or if you prefer you can order them from another web store

​

GO TO AliExpress.com

Motor for TENKI OPTION 2.png
Motor for TENKI OPTION 2
​

12V DC Electric Motor, Worm Gear, Reverse Direction, and speed should be around 100RPM.

If you want to make TENKI for Lawnmower and Video survailance only, this is for drive motors, they are cheaper but les powerful then Option 1. Also you need two of them, they working on 12V and drain around 1 to 2A of current under load.

You can find them on Alliexpress, this is the link, or you can click on the link below this text.

https://www.aliexpress.com/item/32859295984.html?spm=a2g0o.order_list.0.0.54061802x1g29r

or if you prefer you can order them from another web store

​

GO TO AliExpress.com

Tenki Motor Driver.jpg
Tenki Motor Driver

We have developed a special driver for the Tenki Base vehicle.

There is a control for two drive motors, where the direction of rotation can be changed, and a control for one motor that is on attacment which is in use at the moment. This third utility motor can be only turned ON and OFF, the motor CANNOT CHANGE DIRECTION.

It is prety much compatibile with all mikrocontrolers. Outputs of the motors are protected with the 10A fuses, that is maksimum curent that you can get from there, and input voltage is to maksimum 30VDC .
The inputs are optically insulated, accepting input voltages from 3.3V to 12V, and each of the motor controls has its own ground.

You can order this by clicking on button beneath. Price for the fuly assembled and tested driver is $90 CAD + Shipping and Taxes to your cantry, and you will get istruction how to connect.
bottom of page